BOTTLECAGE
Item 955.815.001
Assembly on 500Wh battery compartment
Item 955.815.002
Universal
SIDE BOTTLECAGE HOLDER
Item 955.815.003
Assembly on 500Wh battery compartment
Item 955.815.004 + Item 955.520.020
Bottle cage universal holder with side extraction
Assembly on 500Wh EVO cover
Item 955.815.004
Universal
BATTERY CHARGER
Item 955.830.043
Battery charger 110/240V 4Ah
LIGHTS CABLE
Item 955.435.025
TFT display light cable 12V 0,3A.
STAND FOR BICYCLES
Item 955.764.001
Stand for bicycles with rear tire width from 40mm to 70mm.
Item 955.764.002
Stand for bicycles with rear tire width till 40mm.
- Adjustable in length.
- Maximum load: 25kg.
SPECIAL GREASE
Item 955.435.001
Special grease for E-P3 motor – Gr. 5
Polini grease for E-P3 motor has been formulated to improve its resistance to the centrifugal strengths, granting a hard adhesion to the lubricated parts with the aim to increase the life and reduce the noise of the motor.
PAINTABLE SKID PLATE
Item 955.810.001
MTB skid plate
Item 955.810.002
Road skid plate
E-Bike with stand:
Item 955.810.003
MTB skid plate
Item 955.810.004
Road skid plate
500 WH BATTERY DOWN-TUBE FIRST VERSION COVER
Item 955.520.009
Battery down-tube cover
It is recommended the assembly of this part before cleaning the e-bike with water.
CUT OFF SENSOR
Item 955.830.047 E-P3+ EVO
Cut Off Sensor is a gear sensor that allows to interrupt for a few tenths of second the power provided to the motor when you operate on the shifts control, both when down-shifting or increasing. Thanks to the Cut Off Sensor you may shift without causing hits or pulls to the gears and chain. It is installed on the rear shifter cable with the aim to improve the efficiency and the lifetime of all the transmission parts.
